Stehr Gravel Road Finisher
Stehr Gravel Road Finisher is the ideal equipment for hiking trails, gravel roads maintanance, gravel paths in national or tourist park, golf playgrounds, etc.maintenance on the lowest price. The dimensions of the Stehr gravel road finisher have been engineered to allow a road with a water-bonded surface of 3meters in width to be built and restored in three steps.
Called the gravel road finisher, this system is mounted on the front and back of tractors, wheeled loaders, Unimogs and similar carriers. The rear-mounted system consists of a mixing apparatus with an attached shaping device or built-in screed. As the vehicle moves in its normal direction of travel, the roadway material is loosened, mixed and shaped.
The mixing effect is accomplished purely statically and requires no additional drive or power: tools stir the material up using the energy generated by the material itself moving through the system. A scraper blade is also mounted on the sides, which can be extended beyond the system’s normal operating width, and is used to push humus and other vegetation outward onto the embankment to allow rainwater to drain off. It is also possible to mix previously applied binding agents such as lime or cement, or gravel and blends of minerals that were spread earlier into the existing surface material.
The dimensions of the Stehr gravel road finisher have been engineered to allow a road with a water-bonded surface of 3 meters in width to be built and restored in three steps:
1. Push organic material (vegetation, humus etc.) from the center of the road outward onto the embankments; 2. Loosen, mix and camber; 3. Compact