Winter road maintenance

more information Snow blower for trucks Working capacuty: 260 to 400 t/h
Working width x depth: 2100 mm х 700 mm/ 2400 mm x 900 mm
more information Snow blower for wheel loader YDSB2800 Working capacity: 350 t/h - 400 t/h
Working width х depth 2800 мм х 700мм
Engine power : 110 кW - 194 kW(own aggregate)
more information HYDROG OCN Side sweepers for road sweepeng and snow cleaning Sweepers are intended to clean the surface from impurities such as sand, grit, mud, snow, etc. The impurities from the ground are discarded by the brush on the side.
more information HYDROG PS-3000 and PS-3200 Multi-segment snowploughs For snow clearing on uneven roads for better adjustment of the blade to the surface. Extremely durable design for the most demanding conditions, with triple protection against damage on uneven surfaces.
more information HYDROG POH-3000 and POH-3200 Snow plough Intended for winter maintenance of urban and interurban roads. Mounted on the mount plate of a truck, tractor or other lift truck (e.g. UNIMOG). The ploughs feature more durable design compared to similar products.
more information PLA Highway snowploughs with hydraulic extension These ploughs have a hydraulically folding section that allows you to reduce the width of the snowplough for example, to pass through the gates on the highway or ride on lower category roads.
more information V type snowploughs Intended for snow removal from roads, yards, sidewalks, alleys, etc.
Mounted to tractors, loaders, cars, lift trucks Multicar etc.
Possible adjustments: “V”, inverted “V”, side left or side right
more information HYDROG PCL snowploughs for tractors Blade width: 1500 ÷ 2400 mm. Steel stiff moldboard, protected against corrosion.
Moldboard turning adjustment: manual or hydraulic.
Elastomeric blades (with higher abrasion resistance than the rubber blades).
Possibility to mounting on a 3-point hitch or on holder mounted on carrier frame.
Possibility to mounting on a forklift.
more information Snow-melting Agent Spreader YDSP0808/ YDSP1510 The snow-melting agent spreaders YDSP0808 and YDSP1510 are used to spread the snow-melting agents like sand, salt and calcium chloride solutions to remove the snow cover and ice and keep the traffic flow and to reduce the risk of accidents in the weather of heavy snow storm.